pewe
|
| posted on 22/1/09 at 02:26 PM |
|
|
Bit of roll hoop
My Roll bar is just a bit too low on the driver's side. Does anyone have a piece of roll hoop i.e. already bent to a radius, going spare that
can be welded on top of the existing one? It needs to be about 50mm diam and 100-125mm high.
Thanks, Pewe 
|
|
|
|
|
Steve Hignett
|
| posted on 22/1/09 at 05:15 PM |
|
|
I should have something for you.
I will take a pic of it tomorrow and see if it is suitable!
|
|
|
welderman
|
| posted on 22/1/09 at 07:42 PM |
|
|
also might have one somewhere if your struggleing
Thank's, Joe 
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
pewe
|
| posted on 23/1/09 at 10:32 AM |
|
|
Thanks guys, would appreciate details/pics/sizes. Just checked the existing one and it's 40mm o/d. Cheers, Pewe
[Edited on 23/1/09 by pewe]
|
|
|
