kipper
|
| posted on 31/1/09 at 10:45 AM |
|
|
quad bike front end
As the header really, I am looking for a quadbike front end for my three wheeler project. Not one of the chinese efforts but honda, or yamaha etc,
WOTYERGOT
kIPPER.
Where did that go?
<<<<
|
|
|
|
|
minitici
|
| posted on 31/1/09 at 12:18 PM |
|
|
Thinking of building one of these?
|
|
|
kipper
|
| posted on 31/1/09 at 12:52 PM |
|
|
not really but on the same lines.
I have a piagio 500cc scooter with a front end right off, just join the two together to make a trike.
500cc twist and go, might be fun. 
Kipper.
Where did that go?
<<<<
|
|
|
Surrey Dave
|
| posted on 31/1/09 at 01:47 PM |
|
|
I was thinking about an automatic scooter based trike!
Could be fun!
Is there a weight below which it would not need SVA or whatever?
[Edited on 31/1/09 by Surrey Dave]
|
|
|
minitici
|
| posted on 31/1/09 at 02:34 PM |
|
|
If you do not modify the original bike frame (i.e. The vehicle can be easily returned to its original configuration) then this is not classed as
'radically modified' therefore no MSVA is required, probably just an inspection to verify the vehicles new configuration and taxation
class.
|
|
|
