bob tatt
|
| posted on 28/3/09 at 05:46 PM |
|
|
white vortx at daytuner today
called upto see damien this morning and there was a lovely white vortx there, is it anyones on here. no plates so im assuming its not on the road yet.
lovely build who ever did it.
|
|
|
|
|
jacko
|
| posted on 28/3/09 at 06:14 PM |
|
|
Is that near harrogate if so its Bobs Bangers of hear
|
|
|
bob tatt
|
| posted on 28/3/09 at 06:46 PM |
|
|
it is near harrogate nice looking car take its pre sva at the moment.
|
|
|
jacko
|
| posted on 28/3/09 at 06:52 PM |
|
|
Bob has passed the sva last friday
|
|
|
thegasmen
|
| posted on 28/3/09 at 07:35 PM |
|
|
white mnr
It was there last week if i remember its got a zx10r engine in it met the guy and his wife briefley mnr built it.
Mick
|
|
|
jacko
|
| posted on 28/3/09 at 07:53 PM |
|
|
quote:
Originally posted by thegasmen
It was there last week if i remember its got a zx10r engine in it met the guy and his wife briefley mnr built it.
Mick
It sounds like its Bobs zx10
it was built by Bob & Tim Windmill but Mnr has had it for getting it ready for sva and setting up
|
|
|
Andy W
|
| posted on 28/3/09 at 08:31 PM |
|
|
Yes it's Roberts (bobs bangers) he's got VIB inspection on Monday, so should be on the road soon
Andy
[Edited on 28/3/09 by Andy W]
|
|
|
Andy W
|
| posted on 28/3/09 at 08:32 PM |
|
|
Yes it's Roberts (bobs bangers) he's got VIB inspection on Monday, so should be on the road soon
Andy
|
|
|
Andy W
|
| posted on 28/3/09 at 08:32 PM |
|
|
Yes it's Roberts (bobs bangers) he's got VIB inspection on Monday, so should be on the road soon
Andy
|
|
|
bobs bangers
|
 posted on 28/3/09 at 09:36 PM |
|
|
Guess What ... It was me !!
I even drove it all the way home from Harrogate.Brrr Chilly !
Damien has done a fantastic job with the mapping. 143 bhp at the wheels.Not as much as I thought it would be but the car feels superb. Plenty of
torque though, I believe the reverse saps a bit of power . I would be interested to hear any other zx10 owners thoughts on performance.I passed sva
last week and took it straight to daytuner dyno and mapping. The car was built mainly by myself and Tim Windmill or perhaps that should be the other
way round !! Jacko even helped us get it on the ground. MNR prepared it for SVA and fitted a couple of extras. It even got a few nods of appreciation
on the way back. Being inspected Monday and then registered. Thanks for your comments I look forward to meeting a few more of you ! I saw the gasmen
leaving daytuner today. I assume Damien has worked his magic on the bike engined dax. If your reading this Damien I managed 10000 rpm !!!! Not for
long though .
Regards
Robert
|
|
|
bob tatt
|
| posted on 29/3/09 at 07:58 AM |
|
|
ine was the mk with no engine in it at the mo top bloke is damien really knows his stuff. hes in the middle of rebuilding my busa after some oil
starvation destroyed the crank. nice car how did you drive it home with no reg i thought you could only go to and from a prearranged mot or sva test.
|
|
|
bobs bangers
|
| posted on 29/3/09 at 10:01 AM |
|
|
That looked a smart car too Bob. I like the full roll cage. I wonder if I should have gone down that route. I drove it back on trade plates fixed
front and rear. Its the same as any unregistered new car now its passed sva and has certifiable chassis number. I have full Trade Insurance so its no
problem. I needed to transport it to my place of business which I'm enitled to do. It would only become a grey area if I took it home VIA
bridlington for fish and chips. !! We can even take a customer out on test drive in a new unregistered car with trade plates...Provided they are fixed
correctly.
Regards
Robert
|
|
|
bob tatt
|
| posted on 29/3/09 at 05:50 PM |
|
|
did you like my wheels they are bitching..
|
|
|
bobs bangers
|
| posted on 29/3/09 at 09:13 PM |
|
|
bitching is a new one on me ! I just thought the car looked like a really well put together car.
|
|
|
