Stuart_B
|
| posted on 2/6/09 at 06:23 PM |
|
|
dash help
hi all, well i am making a new dash for the indy, it is be made the same, bit of plywood, foam and black vinly, but with a koso dash, more savage
buttons and oil pressure gauge.
but should i try and make a dash what goes right to the top of the bubble, or keep to the same what i have all ready got?
opinons please.
 
bubble screen fitted 1
thanks
stuart
black mk indy, 1.6pinto on cbr600 bike carb's.
|
|
|
|
|
jeffw
|
| posted on 2/6/09 at 06:32 PM |
|
|
Same shape as now.....would look odd all the way to the top of the aeroscreen
|
|
|
Cheffy
|
| posted on 2/6/09 at 06:39 PM |
|
|
Hi Stuart,
Down to personal choice I guess but for me I would definately stick with similar to what you already have. I think it would look too bulky and just
wrong to the top of the aero screen.
Mart.
PS Beaten to it by jeffw! 
[Edited on 2/6/09 by Cheffy]
Farts are like Rock'n'Roll. You love your own but you hate everybody else's. Lemmy, Motorhead.
|
|
|
Mark G
|
| posted on 2/6/09 at 06:55 PM |
|
|
Good luck with the new dash build. What koso are you going for and what engine do you have? There are some incompatabilities. For example I have an
893 blade engine and a koso rx1n and they don't like each other much.
|
|
|
Stuart_B
|
| posted on 2/6/09 at 07:00 PM |
|
|
i have a pinto. the koso XR-SR one.
black mk indy, 1.6pinto on cbr600 bike carb's.
|
|
|
jacko
|
| posted on 2/6/09 at 07:14 PM |
|
|
Hi this is how i made mine
Jacko
[img][/img]
|
|
|
Stuart_B
|
| posted on 2/6/09 at 07:20 PM |
|
|
how have you done that jakco, is taht so you do not underside of the aero screen?
black mk indy, 1.6pinto on cbr600 bike carb's.
|
|
|
Humbug
|
| posted on 2/6/09 at 07:22 PM |
|
|
I was going to say... it wouldn't come to the top of the aeroscreen, assuming the screen overlaps the cabin a bit. I think Jacko's dash
looks quite neat like that - if you make a one piece dash it would give a smooth finish right the way up to the screen.
You could make the basic dash big enough to fill the gap then put it in place to see how it looks. If you don't like it you can then cut it
down.
|
|
|
jacko
|
| posted on 2/6/09 at 07:32 PM |
|
|
quote:
Originally posted by Stuart_B
how have you done that jakco, is that so you do not underside of the aero screen?
Hi the filler bit that goes up under the aero screen is 14g alloy covered in leatherette and trapped behind the original dash it stops the screen
flexing too
Jacko
|
|
|
vinnievector
|
| posted on 2/6/09 at 07:48 PM |
|
|
your dash
probably a good idea to move gear leaver back will give you more scope with your dash design vin.
However i had a prob with the separation on my indicators, i just noticed you have yours mounted on the end of your light bars. problem solved Cheers
Stuart and you didn't need to type a thing .
[Edited on 2/6/09 by vinnievector]
|
|
|
Stuart_B
|
| posted on 11/6/09 at 08:12 PM |
|
|
i have decide, to keep the same dash type, and jsut the new digital dash, oil pressure and 3 savage switch's
thanks for all the help.
stuart
black mk indy, 1.6pinto on cbr600 bike carb's.
|
|
|
.jpg)
