oldtimer
|
posted on 2/3/10 at 05:35 PM |
|
|
Few bits + 4agze motor for sale
Sierra uprights with mushrooms, not offset, £20 picked up Bath. need a good clean.
Sierra calipers, vented, need cleaning, free for pick up.
Escort caliper, blah blah need cleaning, free for pick up Bath.
4agze motor - the supercharged 1.6 Toyota one. Bought off here for fun - not fitted and in the way, includes supercharger, coil packs, injection,
sensors, exhaust manifold. From Raw originally. £400 picked up, no offers thanks.
Pics in photo folder under 'oldtimer' (at the bottom)
Cheers
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
Steve Hignett
|
posted on 2/3/10 at 09:19 PM |
|
|
I don't have the money (or a car) for the engine at the moment, but do you know:
What sort of power the 4agze puts out?
What gearbox goes straight to it (if not, what adapter is needed)?
Is it a similar size to? (zetec, kent, VX etc)
Thanks,
Steve
|
|
NigeEss
|
posted on 2/3/10 at 10:36 PM |
|
|
160bhp and will fit onto the box from the AE86 Corolla (if you can find one).
Adaptors available for type 9. Quite a compact motor, shade bigger than a xflow
but the supercharger bloats it out a bit.
[Edited on 2/3/10 by NigeEss]
|
|
oldtimer
|
posted on 3/3/10 at 01:41 AM |
|
|
They put out the same bhp as a 20v blacktop 4age but about 50% more torque. Type 9 fits with an aftermarket bell houseing - from Raw and others.
|
|
fathead
|
posted on 3/3/10 at 09:48 AM |
|
|
U2U sent re calipers and uprights.
Cheers
Steve
|
|
TimC
|
posted on 3/3/10 at 11:56 AM |
|
|
There is a T50 gearbox on eBay but its nearly £400. It's meant to be a really nice unit to use - although I have no direct experience.
|
|
bimbleuk
|
posted on 3/3/10 at 01:13 PM |
|
|
quote: Originally posted by oldtimer
They put out the same bhp as a 20v blacktop 4age but about 50% more torque. Type 9 fits with an aftermarket bell houseing - from Raw and others.
Plus you can bump the power up to a reasonable 180BHP with a larger crank pulley.
|
|
Bass1st
|
posted on 8/3/10 at 12:47 AM |
|
|
I am running a 4age at the moment - will the engine fit the same mounts, bell housing etc?
|
|
bimbleuk
|
posted on 8/3/10 at 08:02 AM |
|
|
quote: Originally posted by Bass1st
I am running a 4age at the moment - will the engine fit the same mounts, bell housing etc?
They all use the same 3 rib or 7 rib block so bolting it in won't be a problem. You might want to check clearances first though as the
supercharger gubbins do add to the dimensions.
[Edited on 8-3-10 by bimbleuk]
|
|
nasty
|
posted on 9/3/10 at 10:17 PM |
|
|
U2U re engine sent last Sunday night.
|
|
oldtimer
|
posted on 16/5/10 at 01:26 PM |
|
|
All sold thanks
|
|