Mark G
|
| posted on 25/4/10 at 11:00 AM |
|
|
Wtd, about 6" of steel tube, int dia 8mm...
As per title really, I'm going to redesign my gear shifter and to do it I will need some steel tube, Internal diameter of 8mm, external
diameter doesn't really matter as long as it's thick enough to weld to.
I only need about 6 inches so I don't really want to go out and buy a meter, Hoping someone may have a little lying around or be able to cut me
off a little bit.
Willing to give a couple of quid plus postage.
Cheers
Mark.
|
|
|
|
|
mangogrooveworkshop
|
| posted on 25/4/10 at 11:39 AM |
|
|
me will look 
|
|
|
mangogrooveworkshop
|
| posted on 25/4/10 at 12:50 PM |
|
|
The piece we got is
8" long 12 mm iner 15mm outer....
|
|
|
Mark G
|
| posted on 25/4/10 at 03:49 PM |
|
|
Thanks for looking, that's too big though.
Needs to be int dia of 8mm as it pivots on some m8 rod.
Thanks again
Mark
|
|
|
Lars
|
| posted on 25/4/10 at 03:54 PM |
|
|
b&Q sell these things fairly cheaply
|
|
|
