RichardK
|
| posted on 31/12/10 at 10:53 AM |
|
|
Wanted:45 degree 50.8mm 1.5mm wall stainless bend
Needed a couple of these and have managed to pick 1 up for a tenner NEW 2' (50.80mm) STAINLESS STEEL 45 DEGREE BEND on eBay (end
time 30-Dec-10 14:47:01 GMT) but the other seem to be double the money any one else got another going spare or know of where I can get another
for ok money.
Cheers
Rich
Gallery updated 11/01/2011
|
|
|
|
|
Stott
|
| posted on 31/12/10 at 11:16 AM |
|
|
Have you emailed the seller to see if he can do another for you?
|
|
|
steve m
|
| posted on 31/12/10 at 11:18 AM |
|
|
Richard
I used some vacuum cleaner stainless bends in my cooling system,
they can be bought very cheaply from any cleaning company supplier
Steve
|
|
|
RichardK
|
| posted on 31/12/10 at 12:10 PM |
|
|
quote:
Originally posted by Stott
Have you emailed the seller to see if he can do another for you?
Yeh, unfortuanantly he only had 2 to start with  Steve I'll have a look in to that thanks
Rich
Gallery updated 11/01/2011
|
|
|
907
|
| posted on 31/12/10 at 12:56 PM |
|
|
If I needed two 45's I would cut a 90 in half.
Much savings. 
Paul G
|
|
|
RichardK
|
| posted on 31/12/10 at 05:22 PM |
|
|
Managed to get another for not much more, yeh, could have done the 90 degree thing but wanted the tails as well for a neat job.
Anyway thanks
Rich
Gallery updated 11/01/2011
|
|
|
Alan B
|
| posted on 31/12/10 at 07:33 PM |
|
|
These guys are good......if you know anyone travelling back from the US soon...
http://www.mcmaster.com/#weld-tube-fittings/=ae1cn4
Forgot to mention...lots of parts modelled in 3D from these guys too...even the elbow...
[Edited on 31/12/10 by Alan B]
|
|
|
