daniel mason
|
| posted on 24/1/11 at 07:42 PM |
|
|
best place to buy aluminium sheet and angle
am after some small ally angle and some alu sheet, and wondering best place to buy.it would also need delivering, cheers
1.5 meters of 15mm x 15mm x 1.2mm angle
3 meters 25mm x 25mm x 3mm angle
2000mm x 1500mm x 2 or 3 mm sheet
|
|
|
|
|
Steve Hignett
|
| posted on 24/1/11 at 08:57 PM |
|
|
Your parcel went today Dan, I'm sorry, that I was so busy I didn't get round to finding a sheet big enough for your stone guards, but I
will!
In fact, let me know the prices you get for the above Ali, and I will get you prices for stone guards, fuel surround, exhaust surround and the
equivelant of the above, in the good stuff 
[Edited on 24/1/11 by Steve Hignett]
|
|
|
scootz
|
| posted on 24/1/11 at 09:03 PM |
|
|
I use these guys Daniel.
Very reasonable!
Linky
It's Evolution Baby!
|
|
|
40inches
|
| posted on 24/1/11 at 09:15 PM |
|
|
quote:
Originally posted by scootz
I use these guys Daniel.
Very reasonable!
Linky
+1, never found anyone else as good 
|
|
|
skodaman
|
| posted on 24/1/11 at 09:45 PM |
|
|
Try Dixons on White Lund Industrial estate bet. Morecambe and Lancaster if you want somewhere reasonably local. Certainly their box-section is cheap
enough.
Skodaman
|
|
|
daniel mason
|
| posted on 24/1/11 at 09:58 PM |
|
|
cheers guys. where is dixons on white lund mate? i am going to driveline on white lund estate on saturday am to have my propshaft shortend and need an
hour to kill. i was gooing to go to macdonalds but am sure i fit in a 10 minute detour! lol
|
|
|
