blakep82
|
| posted on 11/4/11 at 04:59 PM |
|
|
need a good cheap source for 5" steel tube
anyone got any ideas?
its for these gas bottle log burners i'm doing. want to do them cheap to get a few quid out of them. so off cuts would be good. not sure what
length i'd need for each one, but i've got 4 to do.
old co2 fire extinguishers were mentioned in a previous thread, don't know where i'd find any though.
anyone got any laying about?  or any ideas?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
|
|
jacko
|
| posted on 11/4/11 at 05:07 PM |
|
|
blake what do you need 5ins pipe for ? is it the chimney ?
I have just got some 4ins for my fire of a bus / coach exhaust you can buy it in 2m lengths
|
|
|
blakep82
|
| posted on 11/4/11 at 05:10 PM |
|
|
yep its for the chimney. someone mentioned 5 inch so looked for that. 4" is just as capable i'm sure 
where can i get it from? i guess 1 meter is probably about the right length for each one?
[Edited on 11/4/11 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Myke 2463
|
| posted on 11/4/11 at 05:31 PM |
|
|
Scrappies near us often have 4 & 5" stainless tubing from old food processing plants.
Be Lucky Mike.
|
|
|
blakep82
|
| posted on 11/4/11 at 05:40 PM |
|
|
hmm, interesting. i'll see what can find at the scrappy. theres never usually anything much in the ones round here, but might be lucky
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
