CRAIGR
|
| posted on 2/10/11 at 05:55 PM |
|
|
Multi connector plugs
Need some multi connectors to make up an unplugable loom for my dash.
Any recommendations where to get some or even a kit of different ones for sensible money.
|
|
|
|
|
MakeEverything
|
| posted on 2/10/11 at 06:02 PM |
|
|
Got these from ebay. Theyre great.
 
Bulkhead Connector 1
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
40inches
|
| posted on 2/10/11 at 06:38 PM |
|
|
VWP Connectors
|
|
|
scudderfish
|
| posted on 2/10/11 at 06:44 PM |
|
|
I did mine with multiconnectors from the top of this page.
http://www.vehicle-wiring-products.eu/VWP-onlinestore/connectors/multiconnectors.php
If/when I do it again, I'd change them for one's like Richard's as the friction to get them together when fully populated is quite
high.
|
|
|
rusty nuts
|
| posted on 2/10/11 at 07:17 PM |
|
|
Durite list several types in their catalogue which should be available from any decent motor factors although they may have to order them in
|
|
|
Andy S
|
| posted on 2/10/11 at 08:10 PM |
|
|
Try Simtek - they have the best range I have come across - better prices than most as well
Andrew
|
|
|
CRAIGR
|
| posted on 3/10/11 at 07:07 AM |
|
|
Cheers chaps .Great info as always.
|
|
|
steve m
|
| posted on 3/10/11 at 07:16 AM |
|
|
I used 4 x 6 pin durite's on my dash makes it a breeze to whizz off and on again
[Edited on 3/10/11 by steve m]
|
|
|
splitrivet
|
| posted on 3/10/11 at 10:16 AM |
|
|
ATX computer connectors from Maplins like this http://www.maplin.co.uk/atx-motherboard-power-connectors-44019?ordercode=L69AZ cheap as chips,
simples.
Cheers,
Bob
I used to be a Werewolf but I'm alright nowwoooooooooooooo
|
|
|
.jpg)
