cfc999
|
| posted on 9/2/12 at 11:23 PM |
|
|
Wanted Xflow 1300 Inlet Manifold for Twin 40's
Need a 1300 inlet manifold for a set of twin 40's. Can't get my dizzy to fit with the one on the pic. I think it must be off a 1600. Will
do a swap for the right one.
Cheers
Chris
 
Description
 
Description
[Edited on 9/2/12 by cfc999]
[Edited on 10/2/12 by cfc999]
|
|
|
|
|
chicade
|
| posted on 10/2/12 at 08:22 AM |
|
|
anygood ntdwm
eBay - The UK's Online Marketplace
|
|
|
cfc999
|
| posted on 10/2/12 at 09:51 AM |
|
|
quote:
Originally posted by chicade
anygood ntdwm
eBay - The UK's Online Marketplace
Thanks for the link but don't think its any different than the one I have. Needs to be for a 1300 I think.
Cheers
Chris
|
|
|
Alan M
|
| posted on 10/2/12 at 10:20 AM |
|
|
Those carbs were mine! It is the correct manifold, the 1600 manifold is straight, not swan necked.
A dizzy will fit but you will need a side entry cap, even then it's very tight
I eventually went for a megajolt setup
|
|
|
cfc999
|
| posted on 10/2/12 at 11:49 AM |
|
|
quote:
Originally posted by Alan M
Those carbs were mine! It is the correct manifold, the 1600 manifold is straight, not swan necked.
A dizzy will fit but you will need a side entry cap, even then it's very tight
I eventually went for a megajolt setup
Thanks Alan.
Just sent you a u2u.
Cheers
Chris
|
|
|
