Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Brake caliper upgrade.
DANMAN

posted on 4/1/13 at 05:20 AM Reply With Quote
Brake caliper upgrade.

Hi guys.

In my pursuit to shed weight I have been looking into some new brake calipers that are a direct replacement for the old ones. Since I have Cortina uprights I will need to go with a set of M16 units. Rally Design have a set of Wilwood twin pots which look the goods but I am worried about the difference in pedal feel as I have read that some people have had to really stand on the brakes to get them to work after they have changed to new calipers. I am happy with my brake pedal feel and the brake balance the way they are (obviously I will have to readjust the balance after the caliper change) so I don't want to replace the calipers and have it all turn to poo. Has anyone here done a direct swap over of just the calipers without changing anything else and if so did they work ok or did the master cylinder also need replacing?
The cast numbers in one of the current calipers are 64326672 & 64326046.

My current master cylinders are Girling 3/4 for the rear and 5/8 for the front.






View User's Profile View All Posts By User U2U Member
INDY BIRD

posted on 4/1/13 at 09:59 AM Reply With Quote
Changed mine to rally designs m16 replacements no issues other than I think I need to replace my sierra bias valve with an adjustable one now just to put more on the front other than that all good here,

Good luck

View User's Profile View All Posts By User U2U Member
Ben_Copeland

posted on 4/1/13 at 10:45 AM Reply With Quote
Usually they need bleeding properly (can be tricky because of the two bleed points) and the pads need bedding in, then they will be better than OEM. Best to use mintex pads and not wilwood ones.





Ben

Locost Map on Google Maps


Z20LET Astra Turbo, into a Haynes Roadster

Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!

View User's Profile View All Posts By User U2U Member
Fizzer

posted on 4/1/13 at 12:52 PM Reply With Quote
I have escort uprights and replaced my M16's with wilwoods. I didn't change my master cylinder bore size and the pedal feel is fine.
I had Mintex 1144 pads - great for the road but over-heated on track.
Get good fluid (RBF600) if you're going to do track days.

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.