Craigorypeck
|
| posted on 17/1/13 at 07:38 PM |
|
|
Wot afr
Is 13:1 afr a bit lean at wot?
|
|
|
|
|
mtechmatt
|
| posted on 17/1/13 at 08:30 PM |
|
|
Not on an NA no, depends on engine though.
V4 Engine Management System | Online Shop |
Rolling Road Tuning | Motorsport
Preparation | Engine Packages | Throttle
Bodies
Check out what's happening in the workshop via our Facebook Page:
The Workshop
MEGASQUIRT ROLLING ROAD & BIKE CARB TUNING SPECIALISTS
www.mtechautomotive.co.uk
|
|
|
Craigorypeck
|
| posted on 18/1/13 at 12:11 AM |
|
|
Yb cossy 11:1 cr running 6psi via eaton. Using bike carbs and to get it right overall would need a different profile needle tbh.. Just trying to get
the profile I have to behave.
|
|
|
BaileyPerformance
|
| posted on 21/1/13 at 02:06 PM |
|
|
quote:
Originally posted by Craigorypeck
Is 13:1 afr a bit lean at wot?
I would go for 12/1, ideal under low boost with that compression, any more boost 11.5/1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
coyoteboy
|
| posted on 21/1/13 at 09:35 PM |
|
|
For reference I run 11.5:1 on a 3sgte with 18psi with chargecooler.
Engine should be running 8.5:1 cr but I'm not convinced it is,
getting my comp tester checked as it reports 190 psi.
|
|
|
