alfas
|
| posted on 1/5/14 at 03:32 PM |
|
|
1600 - 1700 cc Ford Crossflow engine, complete
dear all,
i´m searching a complete, ready to fit x/flow engine (1600 to 1700cc). it should be tuned, and come with a 711block.
if possible shipping should be considered.
|
|
|
|
|
Fatgadget
|
| posted on 1/5/14 at 04:06 PM |
|
|
I hear you stand a better chance of getting hold of rocking horse poo than getting your grubby mits on one of these relics!.....40 years ago,you had
to pay someone good money to take them off your hands!
|
|
|
alfas
|
| posted on 1/5/14 at 04:14 PM |
|
|
due to certain reasons i need to stay with a crossflow and cannot put a zetec or similar in.
|
|
|
teegray19
|
| posted on 1/5/14 at 04:23 PM |
|
|
i got good money for mine when sold
Built Formular 27 with 1600cc crossflow, 1700cc 0 miles crossflow, Kawasaki ZZR1100
|
|
|
redturner
|
| posted on 1/5/14 at 05:44 PM |
|
|
I have a 1600 711M 6015BA, totally rebuilt with new liners back to standard. Comes complete with manifold, 32/36 dgv 5a carb and k & N air filter.
It is fitted with a full dry sump system. This was our spare Formula Ford engine, but the car has now gone.It is currently on our test rig ready for
inspection in the Nottingham area. If interested at £2500, send me an email address and i will try to send pictures...I am prepared to remove the dry
sump system and fit a wet system...
[Edited on 1/5/14 by redturner]
|
|
|
Brian R
|
| posted on 1/5/14 at 06:11 PM |
|
|
Ford 1600cc Crossflow Engine with Twin 40 Carbs,5 speed gearbox,4 Branch Exhaust
|
|
|
Fatgadget
|
| posted on 1/5/14 at 06:46 PM |
|
|
quote:
Originally posted by teegray19
i got good money for mine when sold
....How much did you get for it out of curiosity if you dont me asking...And how long ago when you got rid of it?.....A mate of mine sold a BOSS
prepared all steel 1700 hot rod jobbie ..chambered head ,twin 40 DCOES..ready to go..500 notes...that was about 15 year ago mind you!
|
|
|
teegray19
|
| posted on 1/5/14 at 07:25 PM |
|
|
sold last year £1100 0 miles fully rebuilt close to race spec.
Built Formular 27 with 1600cc crossflow, 1700cc 0 miles crossflow, Kawasaki ZZR1100
|
|
|
alfas
|
| posted on 1/5/14 at 08:16 PM |
|
|
only to compare prices:
a roadworthy westfield se (factory built), with fresh mot and a mildly tuned 1600 x/flow , drysumped cost me 2800 pound around a year ago....
|
|
|
alfas
|
| posted on 1/5/14 at 08:19 PM |
|
|
quote:
Originally posted by Brian R
Ford 1600cc Crossflow Engine with Twin 40 Carbs,5 speed gearbox,4 Branch Exhaust
i already found that...
unfortunately the seller doesnt ship the engine.
|
|
|
JacksAvon
|
| posted on 2/5/14 at 01:17 AM |
|
|
or for the real thing scroll to the bottom of this page
http://www.mallocksports.co.uk/
|
|
|
