Mattie_maries
|
| posted on 4/5/14 at 04:54 PM |
|
|
Pinto parts
Hi all I'm after a 2.0ltr injection pinto head an I need a 4branch manifold for the same engine can any 1 help?
Cheers matty
|
|
|
|
|
Macbeast
|
| posted on 4/5/14 at 05:07 PM |
|
|
I have this if it's any good to you. I think it came off a Tiger.
[img]http://
 
Tiger ? exhaust
[/img]
I'm addicted to brake fluid, but I can stop anytime.
|
|
|
Mattie_maries
|
| posted on 4/5/14 at 05:12 PM |
|
|
Sounds silly but what's the length of pipe from where it bolts to the head to the first bend
Cheers matty
|
|
|
Macbeast
|
| posted on 4/5/14 at 07:21 PM |
|
|
Not silly, but you'll have to wait until tomorrow when I'll measure.
I'm addicted to brake fluid, but I can stop anytime.
|
|
|
Barkalarr
|
| posted on 4/5/14 at 08:35 PM |
|
|
What about a 2.0 EFI complete engine ?
It's a 205 block with alternator.
Any good
|
|
|
Mattie_maries
|
| posted on 4/5/14 at 09:55 PM |
|
|
Macbest that will b great thanks
As for the efi engine how much are u asking an where abouts are u
|
|
|
Barkalarr
|
| posted on 5/5/14 at 07:07 AM |
|
|
U2u sent
|
|
|
Mattie_maries
|
| posted on 5/5/14 at 12:49 PM |
|
|
barkalar,
your abit far from me and that's a bit pricey also for me thank you anyway
|
|
|
Macbeast
|
| posted on 7/5/14 at 05:52 PM |
|
|
Sorry for the delay.
Flange face to start of first bend is approx 31cm.
I'm addicted to brake fluid, but I can stop anytime.
|
|
|
Eltel
|
| posted on 7/5/14 at 06:52 PM |
|
|
I have an injection head with a piper cam and an rs2000 4 branch manifold but it's bolted to a 2.1 pinto that has been sat in the garden covered
up for the last 3 years and also there's a complete gasket kit to go with it,I do have a full spec on the engine if interested,it was running
before being removed for a project that I had but never got to fitting it no sensible offer refused
|
|
|
Mattie_maries
|
| posted on 7/5/14 at 09:35 PM |
|
|
U2u sent
|
|
|
Mattie_maries
|
| posted on 8/5/14 at 05:18 AM |
|
|
Replied
|
|
|
Eltel
|
| posted on 8/5/14 at 04:44 PM |
|
|
Replied
|
|
|
Mattie_maries
|
| posted on 8/5/14 at 06:42 PM |
|
|
Replied
|
|
|
Mattie_maries
|
| posted on 9/5/14 at 01:12 PM |
|
|
Replied
|
|
|
