nilocp
|
| posted on 2/10/16 at 05:17 PM |
|
|
WTD Shock absorber brackets
Shock absorber brackets, but not Rogue Engineering.
They do not respond!!
|
|
|
|
|
Talon Motorsport
|
| posted on 2/10/16 at 05:41 PM |
|
|
How many brackets are you wanting I'm having a batch of Roadster brackets cut this week.
|
|
|
nilocp
|
| posted on 2/10/16 at 06:05 PM |
|
|
Just a car set, (8) but I think 32mm and 1/2in hole
|
|
|
Talon Motorsport
|
| posted on 2/10/16 at 06:27 PM |
|
|
Roadster damper brackets are 34mm id with 12.1mm holes although you could drill them out £2.50 each plus postage.
[Edited on 2/10/16 by Talon Motorsport]
|
|
|
FuryRebuild
|
| posted on 3/10/16 at 09:25 AM |
|
|
Just a positive observation - 12.1mm is perfect for reaming out to 1/2". You'd then have just the right hole. Reamers are cheap - just be
sure to buy cutting oil as well.
When all you have is a hammer, everything around you is a nail.
www.furyrebuild.co.uk
|
|
|
nilocp
|
| posted on 3/10/16 at 05:14 PM |
|
|
Thanks Talon 32mm would be the size I need.
Thanks Furyrebuild, I have reamers, quite alot actually, and cutting oil
Colin
|
|
|
