APR
|
| posted on 9/1/18 at 02:52 PM |
|
|
Mx5 3.6 Ring and pinion
does anyone have a 3.63 ring and pinion to suit the Mx5 for sale ?
|
|
|
|
|
liam.mccaffrey
|
| posted on 9/1/18 at 06:01 PM |
|
|
Im not sure what they are but i have two open diffs from a mk1 1600 mx5. Youre welcome to for the cost of postage
Build Blog
Build Photo Album
|
|
|
PorkChop
|
| posted on 9/1/18 at 06:29 PM |
|
|
If they're pre 93 1600 diffs they'll be 4.3:1.
You'll need to look at mk2.5 diffs to get a 3.6:1 CWP.
|
|
|
liam.mccaffrey
|
| posted on 9/1/18 at 06:36 PM |
|
|
not sure if this is relevant but they are actually Mazda Miata diffs just in case the us ones were duifferent
Build Blog
Build Photo Album
|
|
|
APR
|
| posted on 9/1/18 at 07:30 PM |
|
|
Thanks for the offer but I believe the 1.6 diffs were 6.5” and the 1.8 are 7”. I could be wrong
The 3.636 diffs were in the NB8B Mx5 or in the mk2 626
|
|
|
chillis
|
| posted on 10/1/18 at 01:05 PM |
|
|
3.63 ring & pinion for the MX5 is pretty rare, you cannot buy them new any more and they were found mainly in Australian market NB's. I
tried to get one from Oz some years ago but the cost & shipping was too much. Why do you need the 3.63? its way too tall for the engine. Most
Aussies complained at how gutless it made the car.
Never under estimate the ingenuity of an idiot!
|
|
|
APR
|
| posted on 10/1/18 at 04:19 PM |
|
|
chillis, its more of a back up plan / just in case job, as i am running a 1.8 turbo with circa 250bhp on a 6 speed box with the 3.909 lsd in a MNR
Vortx
and it may just squeeze 60mph in second !!
[Edited on 10/1/18 by APR]
|
|
|
