number-1
|
| posted on 1/1/21 at 06:33 PM |
|
|
WTD ZETEC E Inlet Manifold to Suit ZX12R TB
Im after a Ford ZETEC E Inlet Manifold to Suit ZX12R 46mm Throttle Bodies. The one i have works but isnt the best so after something a little better
if anyone has one collecting dust before i buy a Danst one
|
|
|
|
|
Tatey
|
| posted on 5/1/21 at 08:41 PM |
|
|
I would highly recommend using the original throttle body rubbers with whatever manifold you get. I bought a DanST manifold and had a lot of issues
trying to get a good seal with the fluro lined tube and jubilee clips. In the end I got a new flange cut from aluminium tooling plate and welded into
my manifold. This allowed me to use the original bolt on rubbers which fit perfectly with my carbs. So the jubilee clips no longer slip off and I have
resolved all of my air leak issues.
|
|
|
