Deckman001
|
| posted on 21/4/21 at 02:07 PM |
|
|
PX600 Air filter
HI all, anyone got a PX600 or ITG filter knocking around that they don't need anymore ? a possible code is C602D for the PX600 or JC40 for the
ITG?
Am going to try and fit them to me bike carbs that don't have any trumpets fitted so am assuming the shallow type filter will be fine.
 
Description
Jason
ps, main reason I'm after the PX one is because they are cheaper and I can get a pre cut a ready to fit base plate for £50 too
[Edited on 21/4/21 by Deckman001]
[Edited on 21/4/21 by Deckman001]
[Edited on 21/4/21 by Deckman001]
|
|
|
|
|
mcerd1
|
| posted on 21/4/21 at 02:22 PM |
|
|
might help if you broaden your search a little 
ITG filters are also very good - the JC40 size is probably right (but you can check that here:
https://www.merlinmotorsport.co.uk/s/itg-air-filters/itg-megaflow-airfilters/air-filters/itg-jc40-air-filter
I've got a couple of old ones lying around that have had the foam removed - you could have one for nowt - but not sure what it'd cost to
post it...
(not much help on there own I know) I used one to check the fit before I got a 25mm tall (internal) one second hand
[Edited on 21/4/2021 by mcerd1]
-
|
|
|
peter030371
|
| posted on 21/4/21 at 09:42 PM |
|
|
I might have what you want sat under my desk at work. Message me your email address and I will send some details tomorrow
|
|
|
Deckman001
|
| posted on 22/4/21 at 05:31 AM |
|
|
quote:
Originally posted by peter030371
I might have what you want sat under my desk at work. Message me your email address and I will send some details tomorrow
U2U sent 
Jason
|
|
|
Deckman001
|
| posted on 22/4/21 at 05:02 PM |
|
|
Just to say A Massive thank you to Peter, who sold me his spare PX C602D. It took me 5 mins to work out how best to try and fit it, and lo and behold,
with just 4 bits of spare edge protection I was able to fit the filter straight to the carbs using the supplied blackbird carbs back plate. And to cap
it all, it fits under the bonnet without any cut outs !! 
Am oh so happy
Jason
|
|
|
peter030371
|
| posted on 22/4/21 at 08:41 PM |
|
|
Glad it fitted for you
|
|
|
