Deckman001
|
| posted on 5/5/21 at 01:47 PM |
|
|
POLYURETHANE ADHESIVE/SEALANT
POLYURETHANE ADHESIVE/SEALANT
As above, anyone got a nearly empty tube that I can have to fix my speedo magnets after I had to move them for IVA and the used adhesive only lasted
about 15 miles on the road, My tube has gone off now and I need so little there isn't much point buying a whole tube for the small amount that i
need.
Thanks
Jason
|
|
|
|
|
theconrodkid
|
| posted on 5/5/21 at 01:50 PM |
|
|
i used superglue, they stayed till i sold the car and beyond
who cares who wins
pass the pork pies
|
|
|
steve m
|
| posted on 5/5/21 at 02:18 PM |
|
|
super glue and a tie wrap over them ?
Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at
|
|
|
Deckman001
|
| posted on 5/5/21 at 02:51 PM |
|
|
Hmmm interesting thought guys, that I hadn't had I've got both so will give it a go when the engine is back in, raising and controlling
the gearbox 
Jason
|
|
|
nick205
|
| posted on 5/5/21 at 03:26 PM |
|
|
IIRC I used superglue to stick my magnets on as well. Did me for 3k miles and then another 2 owners (I lost track of the car after that).
Didn't bother with tie wraps.
|
|
|
watsonpj
|
| posted on 5/5/21 at 04:32 PM |
|
|
Araldite worked for me used the long cure for extra strength and just tapped them in place until it went off. Araldite can deal with surface
imperfections better than superglue but the superglue gel will probably work as well.
|
|
|
wowblaauw
|
| posted on 5/5/21 at 06:26 PM |
|
|
Metal epoxy worked for me in fact any of the epoxy 2 part glued should work.
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in
sideways, chocolate in one hand, wine in the other, body thoroughly used up, totally worn out and screaming...
Damn, What a ride!!"
|
|
|
wowblaauw
|
| posted on 5/5/21 at 06:26 PM |
|
|
Metal epoxy worked for me in fact any of the epoxy 2 part glued should work.
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in
sideways, chocolate in one hand, wine in the other, body thoroughly used up, totally worn out and screaming...
Damn, What a ride!!"
|
|
|
Deckman001
|
| posted on 5/5/21 at 08:13 PM |
|
|
Cheers all, some great advice there so many thanks
Jason
|
|
|
gingerprince
|
| posted on 8/5/21 at 08:57 AM |
|
|
Another vote for metal epoxy. Mine is JB Welded and been on for years.
|
|
|
