Twobeers
|
| posted on 13/1/23 at 12:26 PM |
|
|
Raceline Zetec sump
Need the above for Zetec engine, starter on the exhaust side. Thanks for any help in locating one, appreciated.
|
|
|
|
|
big_wasa
|
| posted on 14/1/23 at 10:04 PM |
|
|
Might help if you say where in the world you are as not every one is willing to post.
|
|
|
Twobeers
|
| posted on 15/1/23 at 09:52 AM |
|
|
Yes, of course. I'm based in Surrey but travel around a fair bit so distant collection solutions may be possible.
|
|
|
big_wasa
|
| posted on 15/1/23 at 11:58 AM |
|
|
I am on the East cost. Around 20 miles from Peterborough. I have a lot of nice Zetec bits but I am not posting.
Sumps are around 650 new with a a gasket on Burton power mine did less than 500 miles. Was drilled and tapped for a turbo oil return ( see pic ).
Other than that it would wash up like new.
£400 with a new gasket.
If it makes it feel a better deal I have the dogs danglies Powerlite rac483 starter I will chuck in for an extra £100
Cheers
|
|
|
djtom
|
| posted on 19/1/23 at 02:25 PM |
|
|
I have one that I'd consider parting with, and I'm based in Surrey.
It suffered a rock strike that caused a crack and was professionally TIG welded to repair it - it's completely oiltight again now.
Silvertop fitment, starter on exhaust side. comes complete with baffle, pickup etc etc.
I'm after £325. Let me know if interested and I can dig it out for photos (or just come and take a look if you are local!)
|
|
|
Twobeers
|
| posted on 19/1/23 at 04:40 PM |
|
|
PM'd you both - should have stated that this is for a black top version, I think they are different regarding windage trays etc.
|
|
|
big_wasa
|
| posted on 20/1/23 at 01:15 PM |
|
|
Mine is the blacktop and pm replied.
|
|
|
big_wasa
|
| posted on 23/1/23 at 05:42 PM |
|
|
Just in case anyone reads this at a latter date, mine has since sold. Thanks 🙏
|
|
|
