ian.stewart
|
| posted on 6/3/23 at 09:35 AM |
|
|
Whees, 3.75" or 95.25 PCD
I have several projects on the go, one is a 70s Triumph,Toledo/Sprint ... it has a ROOF and is WARM in the winter. it also has a 200hp XE in it 
Has anybody got any wheels to fit 3.75/pcd 4 bolt,,
Any real split rims out there, I say this because the car has a FWD offset wheel which needs to be catered for, but the rears will go another 30mm+
dish on the rear
MGF is one for certain. but as yet Im struggling to find a one that appeals,
Something different, Very different..............
|
|
|
|
|
Sanzomat
|
| posted on 6/3/23 at 02:04 PM |
|
|
[img]
 
KN Alloys
[/img]
I've got some of these. 4x95.25 7.5x16 can't remember the offset but something like -30
These are KN Racing, as supplied via GTM for Libras and Spyders in the early 2000's so I believe these were made circa 2002. I'm afraid
they'll need a full refurb as the lacquer is in a state and they've had a bit of abuse on manual tyres changers mounting track day tyres so
don't look like this picture anymore. As such they'll be very cheap! Not split rims though
[Edited on 6/3/23 by Sanzomat]
|
|
|
ian.stewart
|
| posted on 8/3/23 at 11:11 AM |
|
|
quote:
Originally posted by Sanzomat
[img]
KN Alloys
[/img]
I've got some of these. 4x95.25 7.5x16 can't remember the offset but something like -30
These are KN Racing, as supplied via GTM for Libras and Spyders in the early 2000's so I believe these were made circa 2002. I'm afraid
they'll need a full refurb as the lacquer is in a state and they've had a bit of abuse on manual tyres changers mounting track day tyres so
don't look like this picture anymore. As such they'll be very cheap! Not split rims though
[Edited on 6/3/23 by Sanzomat]
Thanks for the offer, but a touch too modern for my taste.
Something different, Very different..............
|
|
|
red22
|
| posted on 8/3/23 at 01:42 PM |
|
|
Why not get some pcd converters then you're not limited to rim choice.
|
|
|
