cliftyhanger
|
| posted on 30/7/24 at 10:21 AM |
|
|
VVT delete for st170 and zetec cam pulley
I am after a VVT delete kit, massive speed or other, just the 2 washers (or even dimesnions to knock one up)
I would happily buy from massive speed in the USA (£24) but the postage and taxes will be more than the 2 washers and a bolt!
I am also after a single cam pulley from a zetec or exhaust off st170 for the swap.
Before anybody tells me to keep the VVT working, I have had enough! I want simple. And on top of that the solenoid and/or vvt pulley are playing silly
buggers. I am prepared to sacrifice a little power for my sanity.
Ta
Clive
|
|
|
|
|
big_wasa
|
| posted on 30/7/24 at 04:33 PM |
|
|
Dimensions are on here somewhere
|
|
|
cliftyhanger
|
| posted on 30/7/24 at 06:45 PM |
|
|
I have searched, but to no avail. I can take the VVT pulley and use that to get the dimensions. It cant be that difficult!
But if somebody has a drawing or can point me in the right direction, that would be very helpful
|
|
|
big_wasa
|
| posted on 31/7/24 at 06:59 PM |
|
|
It’s all in this thread
https://www.locostbuilders.co.uk/viewthread.php?tid=175158
|
|
|
cliftyhanger
|
| posted on 1/8/24 at 03:33 AM |
|
|
I looked thriough that thread before, and have again. But it seems the relevent pictures have disappeared 
I had forgotten I had a spare engine in a lockup, so I can take the pulleys off that to supply a pattern.
|
|
|
gremlin1234
|
| posted on 1/8/24 at 01:51 PM |
|
|
through the magic of archiving, (archive.org) I have recovered some pics from that thread...
 
Description
 
Description
 
Description
 
Description
 
Description
 
Description
 
Description
 
Description
 
Description
 
Description
 
Description
[Edited on 1/8/24 by gremlin1234]
|
|
|
cliftyhanger
|
| posted on 1/8/24 at 02:00 PM |
|
|
Fab, thank you
|
|
|
