200mph
|
| posted on 6/2/05 at 12:36 PM |
|
|
crossflow crank/rods/pistons
Hi, I am after primarily a good crankshaft and conrods for a 1600 crossflow. Also, if anyone happened to have +090 pistons I would be interested.
If you have any other crossflow parts you are looking to sell, I may be interested in buying them too.
Cheers
Mark
|
|
|
|
|
dave69isit
|
 posted on 6/2/05 at 01:09 PM |
|
|
crank
found one on ebay no connection to me
|
|
|
Peter Cowley
|
| posted on 6/2/05 at 02:16 PM |
|
|
I have a inlet manifold for twin carbs if you're interested ? its in very good nick with a water outlet underneath.
Also a std bosch vac dizzy, std oil pump (seemed ok but went for a HP oil pump when i rebuilt the engine) and a camshaft (think its a gt/SPORT spec as
the head is GT and engine was manufactured 1979) the lobes look good, again just went for a brand new piper cam when I rebuilt my engine.
UTU if you're interested - I am in chorley, lancs.
Peter.
|
|
|
trextr7monkey
|
| posted on 6/2/05 at 05:49 PM |
|
|
crossflow cranks
Hi Mark,
I have 6 or 7 crossflow cranks and boxes of con rods as well as a variety of pistons which may be of use to you, also have a pile of standard
camshafts, oil pump, clutches and fly wheels. Thers's a couple of exhaust manifolds etc too.
I did have some =090" heppolites but did a deal withthe chap at yorkshire rally supplies for some rally mudflap material , I think they may
still be on his site for abot £50. We are near Carlisle
|
|
|
SeaBass
|
| posted on 6/2/05 at 06:29 PM |
|
|
I'm in Edinburgh... I have a 1600 block with everything incl oil pump and dizzy less head/pushrods. I also have a head available but no rocker
gear or pushrods.
If your interested give me an email...
jc@bass2dark.freeserve.co.uk
Cheers
|
|
|
200mph
|
| posted on 6/2/05 at 09:07 PM |
|
|
u2u's an email sent
Thanks for the replies everyone
cheers
Mark (formerly 9904169)
|
|
|
