Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Zetec coolant temp sensor connector.
Chris_G

posted on 28/2/06 at 03:11 PM Reply With Quote
Zetec coolant temp sensor connector.

As per title. Anyone got a spare connector to suit the sensor type shown below?

Chris Rescued attachment 94_1_b.JPG
Rescued attachment 94_1_b.JPG






Now finished! Xflow-Zetec swap with GSXR TB's and Megasquirt.

View User's Profile View All Posts By User U2U Member
Aboardman

posted on 28/2/06 at 05:49 PM Reply With Quote
cannot see the pins but does it not take the small electrical connections.

on my zetec i had to connect 1 pin to the temp sensor, the other pin to earth.

View User's Profile View All Posts By User U2U Member
Chris_G

posted on 28/2/06 at 05:56 PM Reply With Quote
Yes, it has got 2 round pins which I could probably use bullet connectors for, but it would be much nicer to have the proper connector
Chris





Now finished! Xflow-Zetec swap with GSXR TB's and Megasquirt.

View User's Profile View All Posts By User U2U Member
BKLOCO

posted on 28/2/06 at 06:44 PM Reply With Quote
I think I've got one.
There were 2 types used though so will need a picture looking down at the pins so as to orientate the 90 deg angle on the plastic bit in relation to the pins as this is what was different.
If it's the right one I'll pop it in the post.





Experience is what you get when you don't get what you want!!!

View User's Profile E-Mail User View All Posts By User U2U Member
Chris_G

posted on 28/2/06 at 07:39 PM Reply With Quote
Thanks BKLOCO!

I'll take a picture tonight and post it later. The picture above is one I found on eBay so it's not even the one to be used anyway but I didn't know there was more than one.

Thank again,
Chris





Now finished! Xflow-Zetec swap with GSXR TB's and Megasquirt.

View User's Profile View All Posts By User U2U Member
Dusty

posted on 28/2/06 at 08:57 PM Reply With Quote
Is that the sensor for the ECU or the temperature guage?

Nigel

View User's Profile E-Mail User View All Posts By User U2U Member
Chris_G

posted on 28/2/06 at 10:35 PM Reply With Quote
BKLOCO, here's a picture........

If it matches up, let me know and I'll drop you an email or U2U


Dusty, this is the standard Ford coolant temp sensor that will be used as the Megasquirt input. There will be a seperate VDO sensor for the guage (Don't supose anyone's got one of those before I go and buy one?)

Cheers
Chris Rescued attachment temp sensor.jpg
Rescued attachment temp sensor.jpg






Now finished! Xflow-Zetec swap with GSXR TB's and Megasquirt.

View User's Profile View All Posts By User U2U Member
BKLOCO

posted on 28/2/06 at 10:43 PM Reply With Quote
Yep. Got a choice of 2 of those.
Black one or a white one.
U2U me an address and I'll pop it in the post.





Experience is what you get when you don't get what you want!!!

View User's Profile E-Mail User View All Posts By User U2U Member
Dusty

posted on 1/3/06 at 01:27 PM Reply With Quote
Thanks Chris.
View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.