theconrodkid
|
| posted on 5/4/06 at 03:43 PM |
|
|
type 9 release lever
type 9 clutch release lever also,part no for spigot bush to go into a zetec and a gearbox mounting,some tina/landrover engine mounts wouldnt go amis
either,ill be at detling sunday btw
who cares who wins
pass the pork pies
|
|
|
|
|
Danozeman
|
| posted on 5/4/06 at 04:55 PM |
|
|
This is the part no for the spigot brg. 1596468. Bought one myself today. 7 quid from ford.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
theconrodkid
|
| posted on 5/4/06 at 05:12 PM |
|
|
cheers dude
who cares who wins
pass the pork pies
|
|
|
shortie
|
| posted on 5/4/06 at 08:22 PM |
|
|
John,
Ned said he's got the clutch release lever if you want it. U2U him.
Rich.
|
|
|
ned
|
| posted on 5/4/06 at 10:09 PM |
|
|
yup, i found a clutch fork and release bearing that I'm 90% sure came off a type9 john. - probably the same one that i sold to chrisw that you
now have actually!!
beware, I've got yellow skin
|
|
|
theconrodkid
|
| posted on 6/4/06 at 06:49 AM |
|
|
cheers ned,can you bring it to detling
who cares who wins
pass the pork pies
|
|
|
Krismc
|
| posted on 6/4/06 at 08:09 PM |
|
|
as said in previous post you can have this also.....if i dont need for the hydraullic conversion!
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
ned
|
| posted on 7/4/06 at 08:19 AM |
|
|
will do jon. i'll put it in a carrier bag as its a bit mucky 
beware, I've got yellow skin
|
|
|
