andrews_45
|
| posted on 3/10/06 at 09:44 AM |
|
|
wanted: escort pinion drive flange
Hi
I need a pinion drive flange off a mk2 escort english axle diff, if anybody can help me out?
I have the larger size but need a 3 and 3/8'' size to match up to my prop shaft. Can swap for my larger sized one or cash waiting...
Ta
|
|
|
|
|
daviep
|
| posted on 3/10/06 at 11:59 AM |
|
|
I think I've got a spare flange, however I'm offshore at the moment! If you don't have any luck elsewhere drop me u2u in a couple of
weeks.
Regards Davie
|
|
|
dave-69isit
|
| posted on 3/10/06 at 12:13 PM |
|
|
flange
wich one you need small or large
[Edited on 3/10/06 by dave-69isit]
|
|
|
daviep
|
| posted on 3/10/06 at 01:16 PM |
|
|
86mm(3+3/8") dia. is the small ford flange, the larger flange is 104mm dia.
Regards Davie
[Edited on 3/10/06 by daviep]
[Edited on 3/10/06 by daviep]
|
|
|
andrews_45
|
| posted on 3/10/06 at 08:53 PM |
|
|
I currently have a small one on my propshaft and the large on on my pinion drive flange.
So either the large sized propshaft u/j or the smaller 3 3/8'' one for the pinion drive flange pls
|
|
|
gazza285
|
| posted on 4/10/06 at 05:22 PM |
|
|
Fairly sure I've got two spare, let me look in the shed..........
DO NOT PUT ON KNOB OR BOLLOCKS!
|
|
|
gazza285
|
| posted on 4/10/06 at 05:41 PM |
|
|
I've got one small flange going spare, and a new seal to go with it if you want. Make me an offer..........
DO NOT PUT ON KNOB OR BOLLOCKS!
|
|
|
