dilley
|
| posted on 12/2/07 at 10:40 PM |
|
|
rubber hose
I am looking for some rubber or silicone hose which must have an id of 62mm and a wall thickness of no more than 4.5mm, I have searched everywhere,
any ideas? I only need a very small length.
|
|
|
|
|
Chippy
|
| posted on 12/2/07 at 11:07 PM |
|
|
Burton Power do one that is 63mm I/D, but only by the meter, and its a bit on the pricey side £47.27,   Err coff, coff. HTH Ray
To make a car go faster, just add lightness. Colin Chapman - OR - fit a bigger engine. Chippy
|
|
|
RazMan
|
| posted on 12/2/07 at 11:22 PM |
|
|
How about some of the intake stub connectors - TB to airbox jobbies 
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
dilley
|
| posted on 12/2/07 at 11:25 PM |
|
|
Thats exactly what I need, mine were supplied by holeshot and I want to replace them, any idea where I can get some? Its hard to find sizes, maybe
some people can measure some of thiers and tell me what there fitted to??
Andrew.
|
|
|
RazMan
|
| posted on 12/2/07 at 11:44 PM |
|
|
A scrappy would be the best best but see if you can have a look at a Gates catalogue in your local motor factor - they are nicely listed by size so
you should find something you can cut a lump off.
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
shortie
|
| posted on 13/2/07 at 08:19 AM |
|
|
Holeshot maybe!??
|
|
|
dilley
|
| posted on 13/2/07 at 08:42 AM |
|
|
I have asked, but after still not recieving my plenum after 6 months..................
|
|
|
