mat.price
|
 posted on 15/2/07 at 04:49 PM |
|
|
racetech f1 interior mirror
is the facetech f1 interior mirror SVA ok or has some passed the SVA with one in there car??
thanks matt
|
|
|
|
|
mike smith1
|
| posted on 15/2/07 at 04:59 PM |
|
|
I would also like to know if anyone has passed with this mirror, as i have one fitted! i presume you mean the centre mounted one?
I think you need to trim the edge of the mirror on the convex style, but not 100% sure.
Mike
|
|
|
nludkin
|
| posted on 15/2/07 at 06:53 PM |
|
|
I failed with one only a couple of weeks ago. They didn't like the fact that it wasn't e-marked and that the edges were sharp, although it
did meet the requirements for size.
I asked if trimming it with edging would allow it to pass, but they were still adamant that it just wouldn't do :-(
|
|
|
JohnN
|
| posted on 15/2/07 at 07:43 PM |
|
|
I put some heatshrink over the nut on the stem and glued some edging around the mirror edge and passed SVA with it last summer.
The tester even said what a fantastic panoramic rear view it gave, it was the convex version.
|
|
|
mat.price
|
 posted on 15/2/07 at 09:09 PM |
|
|
Do you have any pictures of what you have done to the mirror john?
I would like to see them if you have any?
Thanks again
Matt
|
|
|
tks
|
| posted on 16/2/07 at 05:56 PM |
|
|
Thats crap!
Forgot about the E mark.
f***
Tks
The above comments are always meant to be from the above persons perspective.
|
|
|
Stu16v
|
| posted on 16/2/07 at 07:28 PM |
|
|
No requirement for an 'E' mark...
Dont just build it.....make it!
|
|
|
Peteff
|
| posted on 16/2/07 at 07:47 PM |
|
|
None of my mirrors have E marks and they passed, they just have to conform to the standard.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
tks
|
| posted on 17/2/07 at 01:58 PM |
|
|
yupsz
but i'm in spain...
thats another story...
Tks
The above comments are always meant to be from the above persons perspective.
|
|
|
.JPG)
fastavatar.jpg){kind=avatar}
