02GF74
|
| posted on 30/3/07 at 03:53 PM |
|
|
12 Volt 1.8 degree smalle stpper motor
have a look behind the sofa in case you have a 12 Volt, 1.8 degree stepper motor lying around thaqt you donlt need - will be intersted - pay £ 5 for
working one. Needs to be small, 40 mm diameter or less.
|
|
|
|
|
bigandy
|
| posted on 30/3/07 at 04:14 PM |
|
|
Old printers are a cracking place to start looking. Get yourself down to your local recycling centre. Most have a section for old electronic
equipment, and if there aren't any printers in there, I'll eat my hat (and it is one of them russian Muskrat fur hats, although not real
fur...)
Cheers
Andy
Dammit! Too many decisions....
|
|
|
Confused but excited.
|
| posted on 30/3/07 at 11:13 PM |
|
|
And if you are contemplating DIY throttle bodies, they are a good source of butterfly shafts.
Tell them about the bent treacle edges!
|
|
|
