pick
|
posted on 12/6/07 at 04:56 PM |
|
|
wheel studs (what length??)
Hi just wondered if anyone could tell me what length wheel stud they use or I will require in a cortina front hub and also in a sierra rear disk hub
for use with a mini light style wheels?
Thanks
Shaw
|
|
|
twybrow
|
posted on 12/6/07 at 05:02 PM |
|
|
I have the longest possible. Plan is to build up the bodywork, then look at how big the spacers need to be to maximise the track. Then cut the studs
down if needed (which will be fun!).
|
|
RazMan
|
posted on 12/6/07 at 05:58 PM |
|
|
I think the golden rule is something more complicated but I like to have at least 8 full turns of the nuts - ideally 10. So you will have to measure
the hub thickness, and the wheel boss thickness and take it from there.
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
pick
|
posted on 13/6/07 at 06:29 AM |
|
|
Hi , thanks for the advice much appreciated
|
|