David Jenkins
|
| posted on 22/6/07 at 02:30 PM |
|
|
5mm dia stainless steel bar
Does anyone have about 150mm of 5mm dia round stainless steel bar then can sell me for beer tokens?
Every on-line supplier I've looked at has either got imperial sizes only, or wants to sell me a large bundle of 12" lengths, or has a
hugely out-of-proportion P&P charge.
It has to be 5mm to match something else, and it needs to be presentable (or can be emery-papered to look nice). Any grade would do, as long as
it's reasonably machinable (I've got to drill a hole in one end).
Ta muchly,
David
|
|
|
|
|
worX
|
| posted on 22/6/07 at 02:34 PM |
|
|
16mm x 570
ebay
OR
just email this guy - he's bound to have what you need...
eba
y2
hth
Steve
|
|
|
02GF74
|
| posted on 22/6/07 at 02:37 PM |
|
|
a very .ong stainlees steel bolt - probalby strugggle to get 150 mm without any threaded part.
|
|
|
David Jenkins
|
| posted on 22/6/07 at 02:58 PM |
|
|
I had a look through the bay of E - I could only find bundles, and the postage was far too high. 
I actually need around 100mm, but I may need the extra to allow for cock-ups, etc.!
|
|
|
Dave J
|
| posted on 22/6/07 at 03:05 PM |
|
|
I've got quite a few offcuts of 5mm dia stainless bar which will do the trick. (gratis)
Let me know what you want
U2 me your address and I'll get it off to you ASAP
Cheers
Dave
|
|
|
David Jenkins
|
| posted on 22/6/07 at 03:12 PM |
|
|
Thanks very much Dave!
You have a U2U...
|
|
|
Syd Bridge
|
| posted on 22/6/07 at 03:18 PM |
|
|
Must be a few boatyards out your way David? They'll have some, or their fabrication shop will.
|
|
|
David Jenkins
|
| posted on 22/6/07 at 03:30 PM |
|
|
No worries Syd - looks like I'm sorted, thanks to Dave J (now there's a coincidence!)
|
|
|
welderman
|
| posted on 22/6/07 at 03:57 PM |
|
|
dont have 5mm but we have
6
8
10
12
16
20
25
32
40
60
100
sorry
Thank's, Joe 
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
