PhilCross66
|
| posted on 4/9/07 at 08:28 PM |
|
|
Fireblade carb intake trumpet
Just thought I'd try in here to see if anyone has a carb trumpet, mine got ripped off in the accident that wrecked the bike.
Its for a '93 RR-P Fireblade, Im sure a '92 RR-N is the same and possibly some of the slightly later models too.
Hope the photo works, sorry about the poor piccy 
|
|
|
|
|
worX
|
| posted on 4/9/07 at 09:33 PM |
|
|
here's your pic:
[img][/img]
If I were you, I would just smooth that trumpet back out - it is very easy to do!
Steve
|
|
|
PhilCross66
|
| posted on 4/9/07 at 09:43 PM |
|
|
Thats just one of the survivors, I've still got one missing.
I can probably run without any of them fitted, engine seems to run fine with just two at the mo.
What did I do wrong with the photo, I used
[$img]http://www.locostbuilders.co.uk/photos.php?action=showphoto&photo=carb%20trumpet2.JPG[/img]
without the $ in the 1st [$img]
|
|
|
Pdlewis
|
| posted on 5/9/07 at 07:33 AM |
|
|
I think it wants to be a bit more like:
[$img]http://www.locostbuilders.co.uk/upload/carb%20trumpet2.JPG[$/img]
you get the address by going into your archive -> get the photo up -> right click properties -> use the address shown
|
|
|
worX
|
| posted on 5/9/07 at 07:48 AM |
|
|
Well if thats the case Phil, and if no-one else is forthcoming off here, then you should probably give Andy of AB Performance a call on 01449 73 66 33
- he is bound to have a spare one somewhere, but if not you could try giving Malc of Yorkshire engines a call on 07960 011 585.
hope this helps!
Steve
|
|
|
.JPG)
