davepro
|
| posted on 19/11/07 at 12:30 PM |
|
|
Cortina Front Hub Torque Setting
Hi Guys
Does anybody have the correct torque setting for the front hub nut?
Thanks in advance
Dave
|
|
|
|
|
flak monkey
|
| posted on 19/11/07 at 12:31 PM |
|
|
27lb-ft, then back off 90deg
David
Sera
http://www.motosera.com
|
|
|
twybrow
|
| posted on 19/11/07 at 12:47 PM |
|
|
I am fairly sure it says something along the lines of checking the hub play and tighten accordingly. Certainly my hubs feel good and sturdy, and the
torque required was about in the region FlakMonkey quoted.
|
|
|
Fatgadget
|
| posted on 19/11/07 at 01:19 PM |
|
|
Yeah you do it by feel at the same time lining up the castle nut and stub axle hole for the best compromise between slack and tight.
|
|
|
Danozeman
|
| posted on 21/11/07 at 10:02 AM |
|
|
Do it up tight and back off a flat or 2 of the nut.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
