bigrich
|
| posted on 5/3/08 at 09:41 AM |
|
|
duratec inlet wanted
just been asked by my brother if anyone may have an inlet manifold for a 2002 2 litre mondeo
If your fitting T/Bs and junking the manifold then u2u me
usual cash incentives/beer vouchers etc
.JPG)
A pint for the gent and a white wine/fruit based drink for the lady. Those are the rules
|
|
|
|
|
jacko
|
| posted on 5/3/08 at 10:29 AM |
|
|
Tim windmill may have one he has just fitted a griffin manifold try a u2u to him
SORRY he has a zetec wrong engine
Jacko
[Edited on 5/3/08 by jacko]
|
|
|
coozer
|
| posted on 5/3/08 at 11:32 AM |
|
|
2002 Mondeo not Zetec? Duratecs not that old IMO.
1972 V8 Jago
1980 Z750
|
|
|
bigrich
|
| posted on 5/3/08 at 09:51 PM |
|
|
deffo a duratec. so I'm told
plastic manifold with a oil seperator attached
[Edited on 5/3/08 by bigrich]
A pint for the gent and a white wine/fruit based drink for the lady. Those are the rules
|
|
|
rusty nuts
|
| posted on 5/3/08 at 09:58 PM |
|
|
Be careful if using s/h manifold, have had a couple of cases where the secondary butterflies break and get into the engine. Early signs are rattling
from manifold
|
|
|
bigrich
|
| posted on 5/3/08 at 10:19 PM |
|
|
Cheers for the info Rusty, i will pass this on,
aparently this cars manifold is cracked and it idles at 3000rpm so he wants a spare manifold incase it can't be repaired.
A pint for the gent and a white wine/fruit based drink for the lady. Those are the rules
|
|
|
.jpg)
