carlknight1982
|
| posted on 10/4/08 at 10:22 AM |
|
|
Sierra Drum rear axle - swap for disc one!
I have a sierra rear disc set up but have but have brought drum rear uprights! so if anyone wants to do a straight swap a good complete sierra rear
axle with drums for the same with discs im up for it
if not if anyone has got one for sale please drop me a U2U
Oh and i still need mushroom inserts! lol
|
|
|
|
|
ChrisW
|
| posted on 10/4/08 at 02:38 PM |
|
|
I've got a rear disc axle, all complete except calipers, if you wanted to go discs at the back?
£35 collected (UB9 post code) or £45 delivered.
Chris
|
|
|
carlknight1982
|
| posted on 10/4/08 at 07:58 PM |
|
|
thanks chris , ive got a disc set up, problem im havin is ive brought drum rear uprights.
so need a drum set up
|
|
|
ChrisW
|
| posted on 10/4/08 at 10:23 PM |
|
|
Ahh sorry... thought you meant you had drum hubs from the Sierra.
I've got a pair of disc uprights from (I think) a Luego Velocity if they would be of any use to you?
Chris
|
|
|
carlknight1982
|
| posted on 14/4/08 at 05:23 PM |
|
|
complete drum axle
i brought drum uprights not disc and cant afford to chage my set up now, anyone got a drum axle for sale?
if your after a disc axle i have one
|
|
|
indykid
|
| posted on 14/4/08 at 06:13 PM |
|
|
if you're passing west yorkshire, i have a 9" drum setup with 3.92 diff i'd be willing to swap.
tom
|
|
|
carlknight1982
|
| posted on 14/4/08 at 07:20 PM |
|
|
lol maybe as a last resort its a long round trip
i used to work for a company based in dewsbury, down brewery lane.
|
|
|
carlknight1982
|
| posted on 17/4/08 at 10:26 PM |
|
|
still looking anyone got one
|
|
|
carlknight1982
|
| posted on 18/4/08 at 04:40 PM |
|
|
Still looking guys
|
|
|
Confused but excited.
|
| posted on 19/4/08 at 05:19 PM |
|
|
Why don't you and Indykid meet up half way and swap?
Tell them about the bent treacle edges!
|
|
|
ChrisW
|
| posted on 21/4/08 at 07:18 PM |
|
|
Here they are...
 
Luego rear uprights for discs
Sizes are 55mm top, 155mm bottom, 220mm between top and bottom wishbone mounting tubes. Measurements should be considered +/-5mm.
Having looked at them again, I'm not 100% convinced they are for a disc axle, so please compare them with the ones you have before making a
decision. If I remember (or you remind me!) I'll try a set of disc hubs on them to find out.
Cheers, Chris
[Edited on 4/21/2008 by ChrisW]
|
|
|
