RK
|
| posted on 11/7/08 at 04:37 AM |
|
|
Rad Overflow tank
As above. I notice that there are two hoses coming off the plastic tank I am going to use; one for the radiator, just under the cap, and the other
??
Where does the other hose go?
It is a serious question, I am asking because I really have no idea. Thanks.
|
|
|
|
|
tomblyth
|
| posted on 11/7/08 at 05:46 AM |
|
|
top hose is vent to under the car bottom is expansion hose on mine see drawing
http://www.locostbuilders.co.uk/photos.php?action=showphoto&photo=New%20Picture.JPG
|
|
|
simoto
|
| posted on 11/7/08 at 10:30 AM |
|
|
yep mine too. One to the rad overflow and one venting down to the floor.
striker/blade now complete, thanks to all on this site.
|
|
|
RK
|
| posted on 11/7/08 at 01:17 PM |
|
|
So it basically doesn't go anywhere, just to the outside?
If this is the case, it meets the criteria for the easiest thing I've done on the car so far!! Just have to find a way to attach the container;
should be easy to put it up by the rad.
|
|
|
turbodisplay
|
| posted on 11/7/08 at 02:56 PM |
|
|
on my setup, one to top of engine, one to top of rad.
Darren
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
deneo
|
| posted on 12/7/08 at 02:11 PM |
|
|
contact deneo on here he'll make you a tank for £35 PLUS POST
 
Rescued attachment DSC01134.JPG
|
|
|
RK
|
| posted on 14/7/08 at 02:15 AM |
|
|
I got one from my donor (one of the only things I used: the others were bolts, seat runners, and rear reflectors), and installed it today by making a
little ally bracket and zip ties. It'll do the job.
Thank you everyone!
|
|
|
