Hammerhead
|
| posted on 11/7/08 at 05:40 PM |
|
|
Lathe in Nottingham?
I have 4 x 20mm hubcentric wheel spacers in aluminium that I need turning down to 10mm.
Anyone in Nottingham with a lathe willing to turn them for beer tokens? 
Thanks in anticipation.
Steve.
|
|
|
|
|
RichardK
|
| posted on 11/7/08 at 05:53 PM |
|
|
Or somebody with a milling machine, personally I think that would be a better tool for that job. imho of course.
Rich
Gallery updated 11/01/2011
|
|
|
owelly
|
| posted on 11/7/08 at 06:58 PM |
|
|
For hubcentric, I would go for the lathe.
http://www.ppcmag.co.uk
|
|
|
clairetoo
|
| posted on 12/7/08 at 06:02 AM |
|
|
I'm in Coalville , so not too far away , and I`ve got 2 lathes..............any use ?
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
Hammerhead
|
| posted on 12/7/08 at 09:33 AM |
|
|
Hi Claire,
Coalville isn't too far away. I work in West Bridgford so could pop over after work one day.
I'll u2u you some details if thats ok?
Steve.
|
|
|
clairetoo
|
| posted on 12/7/08 at 11:58 AM |
|
|
No prob
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
