martin1973
|
| posted on 12/10/08 at 07:40 PM |
|
|
valve spring compressor 4 zetec wanted
i have stripped my zetec down but my spring compressor won't work on the valves
has anyone got one they are willing to sell or lend me
martin
|
|
|
|
|
britishtrident
|
| posted on 12/10/08 at 07:50 PM |
|
|
quote:
Originally posted by martin1973
i have stripped my zetec down but my spring compressor won't work on the valves
has anyone got one they are willing to sell or lend me
Pretty sure the Sykes Picavant 03950000 is what you want -- works on the Rover K and most 16 valve engines
http://www.toolsbypost.com/product.php?category=1284&id=1795
Machine Mart do a much cheaper one but I don't know if it has enough clearance
http://www.machinemart.co.uk/shop/product/details/cht461-ohc-valve-spring-compressor/path/automotive-tools
[Edited on 12/10/08 by britishtrident]
 ![Rescued attachment 000].jpg](/gallery/a820065-000].jpg)
Rescued attachment 000].jpg
[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]
|
|
|
big_wasa
|
| posted on 12/10/08 at 07:57 PM |
|
|
I will lend you one Martin. I will say if you are doing the job properly the stem seals are a pita to get out.
[Edited on 12/10/08 by big_wasa]
|
|
|
paulf
|
| posted on 12/10/08 at 09:29 PM |
|
|
I found an easy way to get the valve stem seals off was using a bit of ally tube that was a tight fit over the top of the seal.I belled the end out
using a ball pein hammer and then it just tapped onto the seal and i could remove it by wobbling it about till it came loose.I think it was an old
tent pole and was about 20mm od.
Paul.
quote:
Originally posted by big_wasa
I will lend you one Martin. I will say if you are doing the job properly the stem seals are a pita to get out.
[Edited on 12/10/08 by big_wasa]
|
|
|
rusty nuts
|
| posted on 13/10/08 at 06:37 PM |
|
|
A pillar or bench drill with an adaptor can be used as long as you protect the gasket surface . If you have a welder an adaptor should only take a few
minutes to make. A pair of valve stem seal pliers will remove the seals easily if you can get hold of them.
|
|
|
.jpg)
.jpg)
