Board logo

dyno tunning in north east
peter bland - 22/3/10 at 11:24 AM

any bec tuners recommended ,i know daytuner do them , any others?


t16turbotone - 22/3/10 at 11:27 AM

http://www.boggbros.co.uk/


norm007 - 22/3/10 at 11:40 AM

any bec tuners recommended ,i know daytuner do them , any others? -------------------------------------------------------------------------------


Dyno bike in Malton are sh*t hot.
They have Dyno`s for both bikes and cars.
I know several very happy customers


coozer - 22/3/10 at 12:32 PM

As an aside, any dyno tuners in NE do zetecs with MS?

I've done me best but think a dyno tune for economy is on the cards, problem being the top right hand of the map which equates to 155mph


dazzx10r - 22/3/10 at 12:55 PM

DynoBike in Malton, the guy is very good and reliable, he tuned my GSXR1000k8 race bike, it made 178bhp at the wheel in superstock trim!
he has a rolling road for sidecars and I know he's done a few kitcars.


iank - 22/3/10 at 01:11 PM

Presumable Dynobike is the one being talked about in this thread...
http://www.locostbuilders.co.uk/viewthread.php?tid=112972


trextr7monkey - 22/3/10 at 02:55 PM

Not quite the NE.............. but JDM motorsports at Kirkbride, NorthCumbria, near us, have a good reputation , quite a lot of people travelling down from Scotland to use their set up and some decent roads to test it all out on the way home!
atb
Mike


norm007 - 22/3/10 at 03:46 PM

quote:
Originally posted by iank
Presumable Dynobike is the one being talked about in this thread...
http://www.locostbuilders.co.uk/viewthread.php?tid=112972
===========================================================================

Yes the very same.
Tootall is 1 of the happy punters I know.
You only have to look at his comments in other thread to see how highly Rob rates Dynobike.