Due to having a megasquirt sized hole in my budget,i have
decided to sell my Zetec turbo parts.
They have all been trial fitted but not used.
Included is;
1.refurbished T3 watercooled turbo,with new bearings,thrust,collar,oil seals and coolant fittings.
2.S2 RS turbo exhaust manifold.
3.Braided oil feed kit with fittings to connect to the oil gallery.
4.Brand new exhaust manifold adapter plate with a full set of bolts.
5.Brand new 1.5mm stainless decompression plate.
6.A tube of non setting sealant to seal the decomp plate.
7.A new 20 psi boost gauge with fitting kit.
8.1 meter of new 5mm blue silicone boost hose
This lot owes me in the region of £350,give or take a few quid.
I'm offering it to the lcb crew for £300 plus the carriage before it goes on the bay.
Cheers,
Andy
Don't do it! Go for it!
Steve,mate
If it doesnt sell,i might just do it.Wor lass says i'm mad as well
and should keep going.She recons i have spent to much time and money
to chuck it in
Andy
Well, you know what to chuck in then
Ha Ha
I tried it remember.It didnt work.
Andy
sounds like a good lass you have there
What do you reckon should I have a dabble mmmmmm
Andy...... didn't have you down as a giver upper Bet you sit down to pi55 as well.
Cheers
RichardK aka killer
[Edited on 10/4/11 by Killer]
OOH Rich.I bet you think your sooo funny
Not giving up on the plan,i jus want it running on injection.
If it doesnt go it will all get mothballed in the garage and come out again later.
Andy
Last chance before it goes on the bay.
BTW it is for a 2.0 silver or blacktop.
Cheers,
Andy
Any pictures?
Been offered a zetec locally fairly cheap and this is tempting.
i will take some in the morning and put them up.
Andy
Don't sell the bits Andy, mothball them until you have the injection side of things covered!
You know you'll only want to buy all the bits again once you've sold them, lol.
I'll pop round next month with the Mac and see what you think of the old turbo malarky.
PS It's Ben from Shields ;-)
Ive seen all these parts attached a Zetec ''my old Zetec'' sitting in andys garage and its a great setup, i agree andy that you
shouldnt sell up!!
Keep a hold of it or at least wait until i can afford too buy my engine and Turbo back off you!!
Kris mate,
You are too late
It is already sold,pending payment
Andy
I have just uploaded some photos to my archive.
For anyone that wants a look.
Andy
Ah well I did try! Hope everything goes well with the sale mate, see you at stoney! Doubt I'll get to the old skool ford thing next sunday which
is a shame.
Cheers
R
Alright Richard,how's the head job going?(smirk)
my head gasket started to leak coolant last week,so have just replaced it.
It seems ok up to now.
Andy
Wouldnt know mate, other half has had be decorating for the last 3 days rest of the time been working loads lately and working away from home
doesn't help! Anyway off Wed/Thursday/Friday so hoping to get her sorted. Thinking about it the old skool ford thing maybe an ideal run out to
test it??
I'll keep you up to date mate
See ya
R