Im clearing out the workshop, and need to get shot of the old crossflow i bought for the Dutton.
Its a +.040" block, with head, crank, pistons, valves and pretty much everything to make a reasonable engine.

Im after £30 for all of the crossflow bits. I thik its even got an old alternator and starter as well, but will need to confirm.

Anyone Interested?

Ive also got an alloy manifold for a crossflow to take twin 40's. For sale at £65 ono - Cost me £100 and never used.

Also, ive got an aluminium Cologne - T9 bellhousing for the 2.8 / 2.9 Cologne V6 or Capri. Cost me £85, Selling for £50 ono cleaned and painted.

Is the carb side of the inlet manifold parallel to the head side, or do the carbs side at an angle?

Cant remember, ill check tomorrow morning, but i think its level.

Sorry I mean are the mating faces parallel

Sorry I mean are the mating faces parallel

quote:

---

Originally posted by prawnabie
Sorry I mean are the mating faces parallel

---

I could use a starter motor if it's the right sort and you're prepared to post
(and locost of course).

quote:

---

Originally posted by skodaman
I could use a starter motor if it's the right sort and you're prepared to post
(and locost of course).

---

quote:

---

Originally posted by MakeEverything

quote:

---

Originally posted by prawnabie
Sorry I mean are the mating faces parallel

---

Yes i know, i think they are, but ill check tomorrow. Its in the garage!

---

If you were nearer I'd have the engine off you in a second - if it's a 1600? (not that it matters as you're so far away )

quote:

---

Originally posted by D Beddows
If you were nearer I'd have the engine off you in a second - if it's a 1600? (not that it matters as you're so far away )

---

I've got several 1300's so I don't feel so bad now best of luck getting rid/selling