Stolen of the puma forum:

http://www.pumapeople.com/forum/index.php?showtopic=99953

If you can't see it:

First Off People im new to pumapeople im off ZSOC and own a Fiesta MK5 ZS. But i feel this engine is good to you puma owners so here is goes! Need to fund my new engine buld! I will either sell engine as it is or split for parts or just the cam set up heres some info:

Engine

Phase 2 Blacktop Zetec SE Engine on 38K (Clocks to prove) and service history
Engine looks brand new on apperance alone. It was driven 33K by a 55 Yr old woman and 5K by me.
Engine has full service history all done from Ford, With one done only 1K ago

Set up

Shawspeed SS4 Cams - Fitted by JRS Motorsport
HD Big End Bolts - Fitted by JRS Motorsport
Dreamscience Custom Mapped ECU (With Launch Contol & Rev Limit of 7150RPm) - Around 145-155 Bhp (Two People on ZSOC have same set up one RR at 153 other at 147, which is the best figures so far on SS4's) - With the ECU you also get one more map for free if you do any other mods
New Uprated Shells fitted before bolts were changed

All this done at Christmas

Engine is very fun and revvy to drive!

Prices

First off ill tell you how much it has cost me and how much i will sell

Engine as it is with Cams Fitted & Mapped

38K Phase 2 Engine Possibly worth - £600-700
SS4 Cams & Bolts - £400
Uprated Shells - £120
ECU With Dreamscience Custom Map - £450

Fitting was £350 For Cams,Bolts And Shells. So thats £2000 worth of kit.

Will sell for £1300 o.n.o or £1600 Fitted with New Fluids and everything needed to put into a puma

Shawspeed SS4 Set Up Kit

SS4 Cams & Bolts - £400
ECU With Dreamscience Custom Map - £450

Thats £850 worth of kit. Plus another map by Dreamscience for free. Maybee need tweaking if put in different engine.

£700 o.n.o

Engine Completley Standard

On 38K Running Engine £600 o.n.o

If your only after certain bits, PM me. Offers on everything something can always be sorted

Will fit a puma easily, i can supply RH Engine mount that would be needed when putting this into a 1.7 puma (not sure about 1.6 or 1.4) and i can also supply wiring for either anologue or digi dash. This can be easily dropped into a puma and would be something different in a puma!

Phone number - 07859903370 if it would be easier.

I MAY BE INTERESTED IN P/X WITH SOME ITEMS LET ME KNOW!

Reason Sump is off guys is i rounded out the oil drain plug and had to get the oil out before transporting the engine back home form mates garage in my mums new audi! Will be put back on for th enew buyer!

Sounds expensive to me for an engine with limited modification and power that can be had for less money with a different engine. IMO of course.

its the age old thing of there is no replacement for displacement. if you hunt around you can get a 2.0 duratec for that kind of money.

Oh ok i thought that looked reasonable, thought the 1.6's were worth quite a bit. Oh well