Board logo

bargain head work @ Burton Power
gavin174 - 6/2/14 at 07:01 PM

http://www.burtonpower.com/cnc-machining-zetec-e-2-0-focus-rs-head-cncb8.html

think there might be a problem with the webpage!!


looks good for a £1

MP3C - 6/2/14 at 07:21 PM

Must have found it already, says £1006 for me

Matt

gavin174 - 6/2/14 at 07:24 PM

yes.. says it for me now...

bugger should have bought it quicker!!

ianm67 - 6/2/14 at 08:41 PM

If you want a Zetec head porting, call Andy Weston at Cylinder Head Developments. He's done the head on mine and it's a work of art. You'll also get a large pile of change compared to the Burton price that's for sure.......

bob - 6/2/14 at 08:56 PM

Nice one Ian, what gains will you get from the head work.

ianm67 - 6/2/14 at 09:10 PM

quote:
Originally posted by bob
Nice one Ian, what gains will you get from the head work.


Hello Bob,
The engine will be running standard cams until I get the car through IVA. I am going to to use one of the GBS plenum chambers with standard injectors and either a Megasquirt or Omex ECU. I have been told to expect around 175bhp in this trim. A cam swap should see another 10bhp. Andy has ported the inlet and exhaust ports, valves have been given 3 angle seats and the chambers volumes have all been balanced. Cam followers have been reshimmed and the whole lot reassembled.

bob - 7/2/14 at 01:39 PM

Thanks Ian.
I had a look at the webpage, i have a feeling they have or have access to a rolling road over there.

I will see how the year pans out