Board logo

Fast Road Cam for Pinto Engine
VinceGledhill - 29/9/05 at 09:25 AM

Didn't sell it on here earlier so have now bunged it on E-bay.

Grab yourself some extra power.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=4579084657&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1

RichardK - 29/9/05 at 07:44 PM

Would this be a bit too much for a 1.6?

I believe the one kent recommend is the FR21 for the 1.6 pinto.

When looking at a pinto engine is there any way of telling easily if it's a 2.0 or 1.6

Cheers

Rich

Mark Allanson - 29/9/05 at 10:04 PM

Would a FR33 suit my injection engine?, I have heard that an FR32 was more suitable - but to what downside?

indykid - 1/10/05 at 10:27 AM

quote:
Originally posted by RichardK

When looking at a pinto engine is there any way of telling easily if it's a 2.0 or 1.6

Cheers

Rich


look on the side of the block. a 1.6 will have 165, a 2.0 will have 205 embossed in the casting. afaik, the 1.8 has 185 strangely enough.

hth
tom

RichardK - 1/10/05 at 09:46 PM

Thanks Tom, off to the scrappy I go, there was a sierra there that I took a couple of bits out of earlier but the engine was nearly complete and I thought if it was a 2.0 I would have the cam shaft out of that to stick in my 1.6

Thanks for your help.

Rich