Board logo

X/ Flow spares stash......ntdwm
mangogrooveworkshop - 1/5/06 at 08:07 PM

aul Turner

PostPosted: Wed Apr 19, 2006 1:59 pm Post subject: X-flow spares Reply with quote
The Caterham has been Zetec powered now for about 4 1/2 years and I should really clear out my spares. All prices are negotiable as is carriage.

Wilcox ultralite (3kg) slotted flywheel with AP paddle clutch (orange spring), 2 plates (suit 20 and 23 spline gearboxes) and release bearing. Approx 1000 mile only. £275

Off side engine mounts, 2 x dry sump and 1 x wet sump. £15 each

711m block +20 bore with standard type pistons. £60

1600 head, standard and untouched. £40

1600 crank, 10,10 on the journals. £30

1600 rods, as standard. £50

Cam with 420 thou lift approx, stamped 3 on the end, unused regrind. £5

Kent 254 cam, 2500 miles and excellent condition. £25

Rockers, LH and RH some lightened some standard, must be 3 or 4 complete sets. £20 the lot

New 74 degree thermostat. £5

Call me on 0789 164 9924

Paul