Board logo

caged snake
woodster - 5/3/07 at 03:18 PM

nowt to do with me ..... flea bay

http://cgi.ebay.co.uk/WILDMOOR-SNAKE_W0QQitemZ150097361814QQihZ005QQcategoryZ29750QQrdZ1QQcmdZViewItem

Rollcage seems to be at ear level apart from that I quite like it

ch1ll1 - 5/3/07 at 03:21 PM

its got a nice back end

mookaloid - 5/3/07 at 03:24 PM

quote:
Originally posted by ch1ll1
its got a nice back end


Agreed - I quite like that

Not sure about the colour though....

David Jenkins - 5/3/07 at 03:26 PM

It is a bit purple, isn't it...

Mr Whippy - 5/3/07 at 03:29 PM

one hell off a cage, quite a smart looking machine

Richard Quinn - 5/3/07 at 03:44 PM

Spotted this in this month's "Which Kit". Apparently they are supposed to be quite reasonable price-wise. Anyone know of anyone who's got one?

Dale - 5/3/07 at 03:55 PM

Similar ass end to what I am hoping to end up with.
Very smart looking car though - I dont think the cage would be tall enough though as the drivers helmet is sticking up through it.
Dale

zxrlocost - 5/3/07 at 03:58 PM

isnt it a bit of an MNR and a MK with a different back end

ch1ll1 - 5/3/07 at 03:58 PM

just found this

http://www.wildmoormtc.co.uk/contact_us.htm

nige - 5/3/07 at 05:00 PM

i quite like it
back end is a little " tvr " ish
is it my old eyes or are the top wishbones square section ??????

no with glasses there oval , old age ehh

[Edited on 5/3/07 by nige]

pathfinder - 5/3/07 at 06:36 PM

Still undecided about the back end, but good to see that someone has the balls to try something a bit different!

12a RX-7 - 5/3/07 at 07:17 PM

to meet MSA regs. The roll cage (lowest point of tube) should be at least 50mm above the level of the seated drivers head IIRC (while wearing a helmet) ... not 50mm below

[Edited on 5/3/07 by 12a RX-7]

MikeRJ - 5/3/07 at 10:11 PM

quote:
Originally posted by nige
i quite like it
back end is a little " tvr " ish


Not too dissimilar to the rear of a Cobra either, which is where the name derives from I guess.

procomp - 6/3/07 at 08:26 AM

Hi one word ( bargepole ).

cheers matt

cossey - 6/3/07 at 08:19 PM

the cage is very like the striker one (with the elbow bars) but is about 4" too low.

TangoMan - 6/3/07 at 10:30 PM

quote:
Originally posted by procomp
Hi one word ( bargepole ).
cheers matt


Do you know something about the company or the individual then Matt.

I like the look of the back end but am not too sure about the colour. It looks like the colour that waste thinners used to end up when using cellulose.

procomp - 7/3/07 at 08:58 AM

Hi the man him self is now postin on here .LINK

cheers matt

Brooky - 7/3/07 at 02:05 PM

Am I right in thinking that Sports Power Drive had this originally.

woodster - 8/3/07 at 10:13 AM

I think it was the one alledgedly designed by some uni for sporty PD