I ve got a grill to fit in my nosecone and it has 4 prongs on it for fitting .Two at top and two at bottom.I m going to drill two holes for the bottom prongs to drop into but what is the best way to fix the top of the grill ?

Small tie wraps though the hole in the grill tab and through a sammll hole in the GRP - non structural

Four blobs of PU Adhesive. No drilling, no holes and very secure........

Phil

quote:

---

Originally posted by Hellfire
Four blobs of PU Adhesive. No drilling, no holes and very secure........

Phil

---

I used tie wraps, but cut the square end off one (latching mech) this tiny square goes on the front, a complete tie wrap is passed through a small hole in the grp from the rear, through the grill and the small square clicked onto the tie wrap and pulled tight, as I used small black tie wraps you really cant see them and they are easily removable.

Cheers

Rich

[Edited on 8/1/11 by Killer]

Thanks everyone !