MakeEverything
|
| posted on 18/2/10 at 11:47 PM |
|
|
Cheap Crossflow Bits
Im clearing out the workshop, and need to get shot of the old crossflow i bought for the Dutton.
Its a +.040" block, with head, crank, pistons, valves and pretty much everything to make a reasonable engine.
Im after £30 for all of the crossflow bits. I thik its even got an old alternator and starter as well, but will need to confirm.
Anyone Interested?
Ive also got an alloy manifold for a crossflow to take twin 40's. For sale at £65 ono - Cost me £100 and never used.
Also, ive got an aluminium Cologne - T9 bellhousing for the 2.8 / 2.9 Cologne V6 or Capri. Cost me £85, Selling for £50 ono cleaned and painted.
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
|
|
prawnabie
|
| posted on 18/2/10 at 11:57 PM |
|
|
Is the carb side of the inlet manifold parallel to the head side, or do the carbs side at an angle?
|
|
|
MakeEverything
|
| posted on 18/2/10 at 11:58 PM |
|
|
Cant remember, ill check tomorrow morning, but i think its level.
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
prawnabie
|
| posted on 19/2/10 at 12:02 AM |
|
|
Sorry I mean are the mating faces parallel
|
|
|
prawnabie
|
| posted on 19/2/10 at 12:02 AM |
|
|
Sorry I mean are the mating faces parallel
|
|
|
MakeEverything
|
| posted on 19/2/10 at 12:06 AM |
|
|
quote:
Originally posted by prawnabie
Sorry I mean are the mating faces parallel
Yes i know, i think they are, but ill check tomorrow. Its in the garage!
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
skodaman
|
| posted on 19/2/10 at 01:12 AM |
|
|
I could use a starter motor if it's the right sort and you're prepared to post
(and locost of course).
Skodaman
|
|
|
MakeEverything
|
| posted on 19/2/10 at 07:29 AM |
|
|
quote:
Originally posted by skodaman
I could use a starter motor if it's the right sort and you're prepared to post
(and locost of course).
OK, ill have a look today to see if i have it.
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
MakeEverything
|
| posted on 19/2/10 at 09:02 AM |
|
|
quote:
Originally posted by MakeEverything
quote:
Originally posted by prawnabie
Sorry I mean are the mating faces parallel
Yes i know, i think they are, but ill check tomorrow. Its in the garage!
Yes the faces are parralel, so the Carbs will sit horizontally - as long s the engine is straight.
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
D Beddows
|
| posted on 19/2/10 at 09:39 AM |
|
|
If you were nearer I'd have the engine off you in a second - if it's a 1600? (not that it matters as you're so far away  )
|
|
|
MakeEverything
|
| posted on 19/2/10 at 09:54 AM |
|
|
quote:
Originally posted by D Beddows
If you were nearer I'd have the engine off you in a second - if it's a 1600? (not that it matters as you're so far away )
I think its a 1300 with a +.040" rebore (not done by me).
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
D Beddows
|
| posted on 19/2/10 at 02:29 PM |
|
|
I've got several 1300's so I don't feel so bad now  best of luck getting rid/selling 
|
|
|
