bob
|
posted on 27/8/10 at 11:04 AM |
|
|
Mini cam set up
http://www.7dayshop.com/catalog/product_info.php?cPath=777_1&products_id=109578
You can get these bare ( no SD card) for £12.99 delivered, the video looks ok i might have a go at this.
|
|
|
bartonp
|
posted on 27/8/10 at 11:11 AM |
|
|
How does that help you dial in your cam timing on an A series?
|
|
balidey
|
posted on 27/8/10 at 12:42 PM |
|
|
Anyone actually used one that can comment on how good / bad they are?
Dutch bears have terrible skin due to their clogged paws
|
|
IanBrace
|
posted on 27/8/10 at 01:43 PM |
|
|
Picture quality is OK on laptop.. Mine has a habit of switching itself off though. Can't really complain at the price..
www.aerialphotography.org.uk
|
|
55ant
|
posted on 27/8/10 at 02:35 PM |
|
|
I was considering this, but as siz and weight isnt a huge issue (not putting it on anything remote controlled)
However i stumbled upon this review,
Youtube
So watched a few more reviews and mainly video footage, found this one, not the best footage but seemed to be of a better quality,
Youtube
and so i nearlly doubled my budget to a crrrrrrrrrazzy £35.
eBay<
br />
Ill have some camera footage of some in car use after wednesday.
away from cars, now cycling and building TT bikes
|
|
loggyboy
|
posted on 27/8/10 at 03:07 PM |
|
|
My bro had one of these (well looks very similar) and it tended to be seceptable to vibration causing interferance in the picture quality.
|
|
spdpug98
|
posted on 27/8/10 at 03:12 PM |
|
|
I have one and have used it both in the race car and on the MNR:
http://www.youtube.com/watch?v=sznJr_COqDY
http://www.youtube.com/watch?v=4y2edREEJ0I
The problem with using it on the MNR is trying to blank the wind noise out, I have put 2/3 layers of tape over the mic area and it still gets bad wind
noise
My Blog: http://spdpug98.wordpress.com/
|
|
Humbug
|
posted on 27/8/10 at 08:07 PM |
|
|
I've got one of the ebay Chinese ones which are the same shape but have plastic body and slightly different buttons. Quality of recording is OK,
though I think I need a higher speed/spec card, noise is OK, and I have tried two mounting points: one with a bracket fixed onto the roll bar with an
exhaust clamp (good position but a pain to switch on and off because you need to get out of the car) and the other on a little metal tab fixed onto
one of the bolts holding the dash on (slightly low to the bonnet but much more accessible). On both of these brackets I used the fixing which is a
spring loaded clip, but then put a thick elastic band doubled or tripled round it to hold it in place. No problems with vibration
Simon
|
|